A tank container is a stainless steel pressure vessel installed in a fastened external frame. Most tanks are made of 316 stainless steel. Most tanks have steam or electric heating devices, inert gas protection devices, decompression devices and other optional equipment required for fluid transportation and handling.
There are corner load-bearing frames for protection and hoisting around the tank. The external frame size of the tank is exactly the same as the size of the international standard 20 'container (20 feet long, 8 feet wide and 8 feet 6 inches high). Can be used for road, rail and water transportation. Can load up to 14300 to 31000 liters (even larger) of fluid cargo. In addition to all the advantages of containerized transportation, it has many advantages such as economical, fast, safe, environmentally friendly and beautiful compared to the "multiple drums loaded into a standard container of dry cargo".
This machine is designed for rotate ISO tank / Container to proper position for easy welding or assembly, based on Country industry department standard ZBJ33003-1990, by absorbing the features of domestic and alien similar products. The machine has the features as useful, reliable, smooth rotation and easy operation.
The machine is composed by one power frame and one idler frame. The power frame is composed by basement, power rotator, driving device, clamp, motorized travel device.In clamp, there are rotation ring, guide wheels, position location device.
When load on the container, make all the position location devices on both power unit and idler unit at the same level, use the manual pin to lock the position. Do same when unload the job. The rotation couldn't be done unless the pin is out after the position is correct. There is travel wheels, wheel seat, shaft, gearbox and lock for the travel device. The device drive the power unit to the proper site, after loading the container, manual lock is used to catch the rails, to make sure the rotation to be smooth.
||20’ ISO tank
||Motor & gearbox
Tank transportation is internationally recognized as the safest way to transport chemicals and food. In the process of distributing chemical products and food to various places, compared with other methods, this is a means of transportation that has no run, run, leak and avoid the contamination of the goods themselves. The standard tank container conforms to the “Regulations for the Management of Road Dangerous Goods Transportation” and does not apply to the verification of the volume of special tank vehicles, but it does not comply with the regulations of the relevant national standard tank container.
The relevant laws of Europe, the United States, Japan and other countries stipulate that some goods must be transported in tanks, and containment is prohibited. This shows the superiority of the tank and other means of transportation and its international popularity.