Designed Welding Turning Rolls High to Support Pipes, Tubes, Cylinders, Tanks

Our designed and manufactured GK type Welding Tank Rotator absorbs the excellence from the same products from the domestic and forign market manufacturing, which is made according to the pressure vessel manufacturer's requirement. This product is applied in the manual welding and automatic welding for metallic tank, it is the necessary for the pressure vessel manufacturing. It has the good character as advanced technology, reliable quality, easy operation and so on.

Installation

The driver and idlers should be placed on the same horizontal foundation, be paralleled, based bottom should close to floor completely. If use for long term, you must fix the bases. When trial-run, you should keep work-pc without large axis drifting.

Maintenance

• Check and remove the impediment on the machine before welding, assign stuff to maintain and use. The rubber wheels do not touch oil, and be kept away from high temperature, to avoid speed aging.
• Charge No.30 mechanical oil into reducer when installation and commissioning. After using one month, discharging it and clean, then charge new oil. After that, change it every half a year.
• Welding grounding cable must be connected with work-piece reliably can not be laid on the welding rotator directly, to avoid damaging bearings.
• For wiring and maintenance of motor and inverter, refer to N2 serial inverter manual.
• Frequently clean and check motor, to avoid it getting damp or other objects enter into it, be noted if there is any abnormity occur.