|Rotary Capacity:||50 Ton||Loading Capaicty:||75+ Ton|
|Workpiece Dia. Range:||800-4400mm||Speed Range:||100-1000mm/min|
self aligning rotator,
pipe rotators for welding
Two years Warranty Self Align Welding Rotators 50 Ton Automatic adjusting
The self adjusting welding rotator is for welding, polishing, lining and assembly of a cylinder, the self adjustable roller can adjust itself according to the size of the cylinder; adjustable roller frame can be divided into stalls by adjusting screw rod adjusting screw or, by AC frequency conversion control, line speed for digital display, advanced and reliable. The factory can also be designed according to the user needs a variety of types of roller frame.
Turning Capacity: 50T
Roller Diameter : Φ400mm
Roller width: 200 mm
Roller surface speed range: 100-1000mm / min
Loaded Vessel/Tank diameter range: Φ800-4400mm
Drive unit: AC frequency conversion motor and qualified gearbox.
Wheel center adjustment (for both drive unit and Idler unit): Self Align Type.
Remote control: Remote control pendent with 15mtrs long Cable
Rotational speeds (variable speed AC drive): Step-less variable speeds are to be adjusted from min 100mm/min to max 1000mm/min by a potentiometer on the remote control through inverter.
Rollers: Polyurethene (PU) lined steel rollers with thickness at 25mm.
Motor power: 4kW
-Chemicals & petrochemicals industry
-Boiler industry-Pipe industry
-For Welding, Polishing, Positioning, etc
The Welding Rotators are built in capacities 50ton.
The wheels are wrapped by thick PU, which can ensure the support capacity and last working long time.
Supply range as below:
|Power unit with motors & gearbox||1 unit|
|Idler unit, powerless||1 unit|
|Control cabinet furnished with Schneider / Siemens components||1 unit|
|Remote box with 15m cables||1 unit|
|Wireless (Radio) remote box||1 unit (Optional)|
How to maintain the machine
1. This welding rotator needs cleaning before putting into use. And to avoid aging, the rubber rollers should stay away from oils and high temperature. If possible, there should be a specific person to operate and maintain this device.
2. Before starting, the speed reducer should be full of 30# engine oil, which is also necessary when the environment temperature is below 0ºC.
3. The oil inside the speed reducer should be completely replaced after the use of first month, and later, the engine oil can be changed every six months.
4. The roller bed can not be used as the welding ground to protect the bearings from being damaged.