|Punching Pressure:||80 Ton||Max Cutting Thickness:||20mm|
|Shear Angle:||7deg||Punch Depth:||20mm|
hydraulic ironworker machine,
small hydraulic ironworker
The machine is mainly a dual hydraulic cylinder workstation consisting of five stations.
1. Punching function: The punching end is equipped with a movable table, which provides a range of punching applications. Change the structure and shape of the stamping die, can punch various shapes of parts, such as: stamping various shaped grooves and holes, sheet hemming, punching shutters, punching the flanges of channel steel, I-beam hole.
2. Angle steel cutting function: angle steel cutting blade, can be used on both sides and around. In order to reduce deformation, large angle steel is cut, large rounded corners are used for movable blades, small angle steel is cut, and small rounded corners are used for movable blades. If the blade is not sharp, it can be turned or changed. Another design adopts a hand-in-one integrated device, which can be used automatically or manually.
3. Sectional steel cutting function: In the hole for section steel cutting, different tools can be used to cut round steel, square steel, channel steel, I-beam and T-beam. The blade is fixed by a simple clamp, which is convenient and reliable for disassembly.
4. Shearing function: In addition to cutting plates and strips, the angle of angle steel or plate can also be trimmed (first cut the size of the required workpiece, and then put the shaped workpiece into this station, you can cut Desired angle).
5. Die-shear power station: Die-shear station can design various trough-shaped punches according to the shape requirements. Such as installing rectangular, V-shaped cutters. When the slotted punch requires sharpening, only the side and front of the punch can be ground. The punch holder is equipped with a movable blade, which can be turned or turned to provide a new cutting edge.
One trip size
|Max punch dia.||25mm||30mm||35mm||38mm|
Using hydraulic transmission, it is the latest product of the domestic combined multifunctional hydraulic combined punching and shearing machine. It can cut, punch, punch and die cut sheet, square steel, round steel, angle steel, channel steel and I-beam.
Technical Regulation Editor
1. Before driving, check whether the transmission parts of the punching and shearing machine and the connecting screws and pins of the parts are loose. Is the electrical grounding intact?
2. Lubricate all parts before work, and test drive for two to three minutes before starting work.
3． No overload is allowed. Punching and shearing of hardened steel is strictly prohibited.
4． Wear gloves and labor protection products when working. Sandals and slippers are strictly prohibited.
5． When punching and shearing, always refuel the punching tools to prevent the upper and lower punches from skewing.
6. Pay attention to the safety of fingers when feeding, especially when the sheet is punched to the last presser foot, it is forbidden to punch and cut.
7. It is strictly forbidden to disassemble, proofread the cutting edge and die when driving. Do not hit the dies, shears and other parts with force.
8. Strictly control the specifications of the sheet, and punching and shearing is strictly prohibited when it exceeds the limit.
9. No other objects and a large amount of material should be piled up in the workplace, and parking must be made during adjustment and cleaning.
10． After the work is completed, shut down and power off in time to clean up the site.