Section Width: | 1500mm | Section Length: | 1500mm |
---|---|---|---|
Workpiece Length: | 15000mm | Milling Speed: | 100-800mm/min VFD |
Milling Power: | 7.5kW | Milling Angle: | 0-45dgr |
High Light: | End Face Milling Machine,vertical milling machine |
High Efficiency Steel End Facing Machine/ Automatic Fabrication Facing Machine
This machine is composed by milling station, elevate column, work table, main body, feeding system, electrical system, guides protector, cutter, etc.
This machine is used to mill the end profile of H beam or BOX column, max job profile is 1200x1500mm, min is 300x200mm
Model |
DX1215 |
DX1515 |
DX1220 |
DX1230 |
Process section size |
1200x1500mm |
1500x1500mm |
1200x2000mm |
1200x3000mm |
Milling head power |
7.5kw |
7.5kw |
7.5kw |
7.5kw |
Horizontal feed speed |
100-800mm/min VFD |
100-800mm/min VFD |
100-800mm/min VFD |
100-800mm/min VFD |
Milling head vertical speed |
100-800mm/min VFD |
100-800mm/min VFD |
100-800mm/min VFD |
100-800mm/min VFD |
Spindle speed of milling head |
75-420rpm, in six steps |
75-420rpm, in six steps |
75-420rpm, in six steps |
75-420rpm, in six steps |
Milling head range |
0-45° |
0-45° |
0-45° |
0-45° |
Because of the high speed development of the society, the engineering quality level for the steel structure required by people is higher and higher, then the jointing face to face of H beam, Box-beam and long thin parts, thus the end-face milling become a very important machining procedure.
The milling of work-piece end-face will increase greatly the production efficiency, then to increase the work-piece quality to reduce the errors at working site, therefore will bring greater benefit to the steel structure companies. Our company launches this new equipment into market according to the situation of the steel structure processing and absorbing the advantages of the others, to meet the market requirements. It can be widely applied not only to steel structure, but also to machinery manufacture of electricity, petrol and oil, bridge, chemical as all-purpose machine.
Applications:
Horizontal motor power:P=3 kW/4kW,960/1500rpm
Vertical motor power:P=1.5kW,1400rpm
Milling head model: TX32A
Milling motor power:P=7.5kW