|Rotary Capacity:||100 Ton||Loading Capaicty:||100+ Ton|
|Workpiece Dia. Range:||1000-5500mm||Speed Range:||100-1000mm/min|
heavy duty pipe rollers,
tank turning rolls
Warranty Welding Turning Rolls for Tank Pressure Vessel Boiler Blasting or Painting
Conventional welding rotator. The welding rotator can be used to weld., Polish and assemble etc. The conventional turning roll can be aligned by itself according to the size of the shell, the adjustbale turning-roll can be adjusted by lead screws and bolts garding. They can be controlled with AC frquency inverter. We can design the truning rollers. According to the customers requirement.
Heavy duty loading capacity is available.
Applied job dia
|Wheel dia. & width(mm)||Wheel linear speed(mm/min)||Motor power(kw)|
|Rubber or PU||Metal|
By stepless inverter
- Turning Capacity: 100T
- Roller Diameter : Φ500mm
- Roller width: 220 mm
- Roller surface speed range: 100-1000mm / min
- Loaded Vessel/Tank diameter range: Φ1000-5000mm
- Drive unit: AC frequency conversion motor and qualified gearbox.
- Wheel center adjustment (for both drive unit and Idler unit): Lifting bolts.
- Remote control: Remote control pendent with 15mtrs long Cable
- Rotational speeds (variable speed AC drive): Step-less variable speeds are to be adjusted from min 100mm/min to max 1000mm/min by a potentiometer on the remote control through inverter.
- Rollers: Polyurethene (PU) lined steel rollers with thickness at 25mm.
- Motor power: 2x4kW
Widely Applications in:
- Chemicals & petrochemicals industry
- Boiler industry
- Storage tank fabrication
- Pipe industry
- For Welding, Polishing, Positioning, etc
Don’t open the control box when power on or working, check the machine working outside, confirming there is no abnormal condition.
When periodic check, you should stop working, cut off power and open cover of control unit.