products

Custom Made Certiflat Welding Table 50x50mm Hole Spacing Flexible

Basic Information
Place of Origin: JIANGSU
Brand Name: WL
Certification: ISO
Model Number: 1000x1000
Minimum Order Quantity: 1set
Packaging Details: wooden case
Delivery Time: 5-10days
Supply Ability: 100sets/month
Detail Information
Application: Welding Assemble Material: HT300
Working Surface: 3D Hole: 50mm
High Light:

steel welding bench

,

metal welding bench


Product Description

 

Inspection method of welded slabs precision parameters. Level 3 plates do not specify contact spot requirements. The level 1 plate requires that the number of contact spots is not less than 20 points in any 25 × 25mm plane. The level 2 plate requires that the number of contact spots is not less than 12 points in any 25 × 25mm plane. The thickness of the casting panel of the welding platform is not easy to be too thin, which is caused by two reasons: 1. The use of the welding platform, as the name implies, the welding platform is to perform welding work on the platform, and it is inevitable to perform beats, and the intensity of the beat As a result, we cannot use too thin panels. 2, Welding platform casting method: The thickness of the welding platform casting is too thin, and defects such as insufficient casting and cold insulation will occur in the production of castings. This is because an excessively thin wall thickness cannot guarantee that the casting alloy liquid has sufficient capacity to fill the mold. Usually under certain casting conditions, each casting alloy has a minimum wall thickness that can fill the mold, commonly known as the minimum wall thickness of the casting alloy. When designing the casting, the design wall thickness of the casting shall be not less than the minimum wall thickness. This minimum wall thickness is related to the fluidity of the casting alloy and the contour dimensions of the casting.


During the production process of the welding platform, there will be deviations in weight. Often, the design of the welding platform takes into account casting errors and machining errors. Generally, the weight error of the cast iron platform should not exceed 10%. When it exceeds 10%, the quality of the welding platform must be further evaluated to determine whether the cast iron platform can be invested use.

Table material HT300
Table size: 1000x1000x200mm
  1200x1200x200mm
  1500x1000x200mm
  2000x1000x200mm
  2000x1500x200mm
  2400x1200x200mm
  3000x1500x200mm
  3000x2000x200mm
  4000x2000x200mm
Hole D28mm/D16mm
Hole center distance 100+0.03mm/50+0.03mm

 

Welding flat plate welding platform cast iron welding flat plate cast iron welding platform flat welding flat plate T-slot welding flat plate welding base plate welding base platform.
There is also a new type of welding platform with a three-dimensional flexible welding platform. The main surface and side surfaces of the table have working surfaces. Positioning members are installed on the five working surfaces, respectively, and they can also extend in five directions to form a larger reference table.
Welded flat plate material: High-strength cast iron HT200-300 working surface hardness is HB170-240, after two manual treatments (artificial annealing 600-700 degrees and natural aging 2-3 years), the accuracy of this product is stable and the wear resistance is good .
Welding flat plate accuracy: It is implemented in accordance with national standard measurement and verification procedures, which are three grades of 1, 2, and 3 respectively.

 

During the production process of the welding platform, there will be deviations in weight. Often, the design of the welding platform takes into account casting errors and machining errors. Generally, the weight error of the cast iron platform should not exceed 10%. When it exceeds 10%, the quality of the welding platform must be further evaluated to determine whether the cast iron platform can be invested use.

 

Custom Made Certiflat Welding Table 50x50mm Hole Spacing Flexible 0

Contact Details
Shiny Xu

WhatsApp : +8615895355226