products

High Performance Klutch Certiflat Welding Table With 5 Working Surface

Basic Information
Place of Origin: JIANGSU
Brand Name: WL
Certification: ISO
Model Number: 2000x3000
Minimum Order Quantity: 1set
Packaging Details: wooden case
Delivery Time: 5-10days
Supply Ability: 100sets/month
Detail Information
Application: Welding Assemble Material: HT300
Working Surface: 3D Hole: 50mm
High Light:

steel welding bench

,

portable welding bench


Product Description

 

Inspection methods for welded plates 1. There should be no rust, scratches, bumps and other appearance defects affecting the use of the welding platform. 2. There should be no casting defects such as sand holes, pores, cracks, slag inclusion and shrinkage on the welding platform working surface. Each casting surface should be completely clear of molding sand, and the surface should be flat and painted securely, and each tax edge should be dulled. 3. T-slots should be provided with installation handles or lifting positions, threaded holes or cylindrical holes on opposite sides of the plate. When setting the lifting position, consider to minimize the deformation caused by the lifting. 4. The welding platform should be subjected to stability treatment and demagnetization. 5. The vertical tolerance between the working surface and the side of the welding platform and the two adjacent sides is level 12 (according to the provisions of GB1184-80 "Tolerance of Shape and Position"). 6. The hardness of the working surface of the welding platform should be between HB170-220 or 187-255. 7. Main inspection items of T-slot A, material and surface hardness. B. Tolerance of shape and position, including nominal size and perpendicularity tolerance. C. Appearance. D. Flatness. E. Touch the spots. F. Plane fluctuation. G. Allowable deflection value of working surface. H. Surface roughness.


During the production process of the welding platform, there will be deviations in weight. Often, the design of the welding platform takes into account casting errors and machining errors. Generally, the weight error of the cast iron platform should not exceed 10%. When it exceeds 10%, the quality of the welding platform must be further evaluated to determine whether the cast iron platform can be invested use.

Table material HT300
Table size: 1000x1000x200mm
  1200x1200x200mm
  1500x1000x200mm
  2000x1000x200mm
  2000x1500x200mm
  2400x1200x200mm
  3000x1500x200mm
  3000x2000x200mm
  4000x2000x200mm
Hole D28mm/D16mm
Hole center distance 100+0.03mm/50+0.03mm

 

Welding flat plate welding platform cast iron welding flat plate cast iron welding platform flat welding flat plate T-slot welding flat plate welding base plate welding base platform.
There is also a new type of welding platform with a three-dimensional flexible welding platform. The main surface and side surfaces of the table have working surfaces. Positioning members are installed on the five working surfaces, respectively, and they can also extend in five directions to form a larger reference table.
Welded flat plate material: High-strength cast iron HT200-300 working surface hardness is HB170-240, after two manual treatments (artificial annealing 600-700 degrees and natural aging 2-3 years), the accuracy of this product is stable and the wear resistance is good .
Welding flat plate accuracy: It is implemented in accordance with national standard measurement and verification procedures, which are three grades of 1, 2, and 3 respectively.

 

During the production process of the welding platform, there will be deviations in weight. Often, the design of the welding platform takes into account casting errors and machining errors. Generally, the weight error of the cast iron platform should not exceed 10%. When it exceeds 10%, the quality of the welding platform must be further evaluated to determine whether the cast iron platform can be invested use.

 

High Performance Klutch Certiflat Welding Table With 5 Working Surface 0

Contact Details
Shiny Xu

WhatsApp : +8615895355226