Low Noise CNC Hydraulic Sheet Metal Bending Machine E21 / DElEM Fast Speed

The bending machine is a machine capable of bending thin plates. Its structure mainly includes a bracket, a table and a clamping plate. The table is placed on the bracket. The table is composed of a base and a pressing plate. The base is hinged with the clamping plate. The base is composed of a seat shell, a coil and a cover plate. The coil is placed in the recess of the seat shell, and the top of the recess is covered with a cover plate. When in use, the coil is energized by the wire, and after the current is energized, the pressure plate is attracted, thereby clamping the thin plate between the pressure plate and the base. Due to the use of electromagnetic force clamping, the pressure plate can be made into a variety of workpiece requirements, and workpieces with side walls can be processed, and the operation is very simple.

Structural Features
1. It adopts all-steel welded structure with sufficient strength and rigidity;
2.Hydraulic upper transmission, the oil cylinders at both ends of the machine tool are placed on the slider, which directly drives the sliding work;
3. The slider synchronization mechanism uses a torsion axis to force synchronization;
4, using mechanical block structure, stable and reliable;
5. The slider stroke can be adjusted quickly and manually, finely adjusted manually, and the counter is displayed;
6. Oblique wedge-type deflection compensation mechanism to ensure higher bending accuracy.

How to use
Processed by ordinary hydraulic bending machine
Q235 sheet to give a brief introduction:
1. First, turn on the power, turn on the key switch on the control panel, and then press the oil pump to start.
2, stroke adjustment, the use of bending machine must pay attention to adjust the stroke, be sure to test run before bending. The upper and lower die of the bending machine must ensure a gap of plate thickness. Otherwise it will damage the mold and the machine. The adjustment of the stroke also has electric quick adjustment and manual fine adjustment.
3, the choice of bending notches, generally choose the slot thickness of 8 times the thickness. If you bend a 4mm sheet, you need to choose a notch of about 32.
4. The backgauge adjustment generally has electric quick adjustment and manual fine adjustment, the method is the same as that of the shearing machine.
5. Press the foot switch to start bending. Different from the shearing machine, the bending machine can be released at any time. When the foot bending machine is released, it will stop and then continue to descend.