|Sucking Head:||1/2||Hose Length:||2-3M|
|Wind Volume:||3000 M3/h||Hose Dia.:||φ120mm|
portable fume extractor,
welding smoke eater
Through the gravitational effect of the fan, the welding smoke exhaust gas is sucked into the air inlet of the welding smoke purifier through the universal dust hood. There is a flame arrester at the air inlet of the welding smoke purifier. With the upward airflow, the first coarse dust is directly reduced to the ash hopper. The particulate smoke is captured on the outer surface by the filter element. After the clean gas is filtered and purified by the filter element, it flows into the clean room from the center of the filter element, and the clean air passes through the activated carbon filter After further purification by adsorption, it is discharged through the air outlet to reach the standard.
It can meet the comprehensive management of welding workshops of various areas. A central system can simultaneously handle the fume purification of multiple welding stations. The main purification method is to install a purification system outside the workshops of large comprehensive workshops and workshops. Air ducts are installed in the workshops to lead the indoor flue gas to the pipeline system for processing and discharge. The freely moving suction arm purifies the flue gas for scattered welding points. . Working principle Through the gravitational action of the fan, the welding smoke exhaust gas is sucked into the galvanized spiral pipe through the universal dust suction arm or the suction port, and then enters the equipment air inlet. The equipment inlet is equipped with a flame arrester, and the spark is blocked by the flame arrester, soot The gas enters the filter chamber of the filter element, using gravity and upward airflow, first of all, the coarse dust is directly reduced to the ash hopper, and the particulate smoke is collected by the filter element on the outer surface. The clean gas is filtered and purified by the filter element and then flows into the clean room. Unless the odor is discharged through the air outlet. The replacement and cleaning of the filter element is prompted by the pressure display. The dust-removing capacity adopts compressed air pulse automatic dust-removal, which stabilizes the resistance of the equipment at a level conducive to work and makes the equipment a high-efficiency dust-removal equipment for long-term mass welding operations.
The main parts include: universal dust extraction arm, high temperature resistant dust extraction hose, dust extraction hood (with air volume adjustment valve), fire barrier, flame retardant high efficiency filter element, dusty drawer combination, caster with brake, fan, motor, etc .
Welding fume purifier is a purifying device specially designed for industrial welding fume and light particles. It is light and flexible and easy to operate. It is also widely used in chemical, electronics, metal processing, tobacco, glass, pharmaceutical, food processing, clean room. , Hospitals and other industries and other places polluted by dust and smoke.
Metals can produce a variety of toxic and harmful gases during industrial welding or other processing processes. Welding soot purifiers, the nature and processing characteristics of the gases in the smoke, we will pass experiments to ensure that no secondary pollution will occur and the operation of the workshop will not be affected. On the premise that the life of the equipment is not affected, the multi-stage purification device is used to purify the welding fume exhaust gas, which can effectively remove the welding fume exhaust gas and can also degrade the tar smell of welding fume and various toxic and harmful gases.
|Wind volume||2400 M3/h||3000M3/h|
The operation of the cleaning system can extend the service life of the filter cartridge, reduce the system energy consumption, and greatly reduce the operation and maintenance costs. The dust removal of the filter cartridge dust collector adopts compressed air pulse dust removal, and the pulse injection valve is sprayed to radially deform the filter cartridge and shake off the dust. The electromagnetic pulse valve used in the dust collector has a blowing pressure of 0.4-0.6Mpa and is set to be automatically cleaned once in 10 minutes at the factory.