|Rotary Capacity:||20 Ton||Loading Capaicty:||20+ Ton|
|Workpiece Dia. Range:||320-3200mm||Speed Range:||100-1000mm/min|
pipe rotators for welding,
pipe welding rotator
Self Adjustable Welding Rotator Bed For Storage Tank And Vessel Piping System
Features: Self align type
Self-adjusting Welding Rotator can align by itself according to the cylinder diameter, adopting cycloid pinwheel reducer or worm gear speed reducer. there are three kinds of rollers : rubber rollers, steel rollers, and steel and rubber combined rollers. Such rotator is used mainly for welding, polishing, and assembling and so on, working with other equipment, can realize the cone being assembled and welded. Such products apply widely to wind power,pressure vessel, petrifaction, pipe, steel structure, and overlaying industries. We can design and make specifically on the users' requirement.
Applied job dia
|Wheel dia. & width(mm)||Wheel linear speed(mm/min)||Motor power(kw)|
|Rubber or PU||Metal|
- Turning Capacity: 20T
- Roller Diameter : Φ350mm
- Roller width: 190 mm
- Roller surface speed range: 100-1000mm / min
- Loaded Vessel/Tank diameter range: Φ320-3200mm
- Drive unit: AC frequency conversion motor and qualified gearbox.
- Wheel center adjustment (for both drive unit and Idler unit): Self Align Type.
- Remote control: Remote control pendent with 15mtrs long Cable
- Rotational speeds (variable speed AC drive): Step-less variable speeds are to be adjusted from min 100mm/min to max 1000mm/min by a potentiometer on the remote control through inverter.
- Rollers: Polyurethene (PU) lined steel rollers with thickness at 25mm.
- Motor power: 1.5kW
Widely Applications in:
- Exhaust Gas / Air treating
- Industrial Piping system for water, wastewater and chemical system
- Storage tank and vessel
- Composit piping system
- Composite and thermoplastic specialty fabtication