products

Steel Material Plate Rolling Machine Fully Automatic 55kw Driving Motor

Basic Information
Place of Origin: Jiangsu
Brand Name: W&L
Certification: ISO
Model Number: W11S80X3000
Minimum Order Quantity: 1set
Packaging Details: container
Delivery Time: 30-50days
Payment Terms: T/T, L/C
Detail Information
Working Length: 3000mm Working Material: Q235, Q345
Pressure: 1050Ton Max Plate Thickness: 80mm
Driving Motor: 55kw Roller Material: 42CrMo
High Light:

cone rolling machine

,

flat bar rolling machine


Product Description

 

The upper roll universal plate rolling machine adopts the upper roll lifting hydraulic transmission and horizontal movement (mechanical transmission). It is driven by the lower roll and is electrically controlled by the operating system. It can complete the pre-bending of both ends of the plate and the rolling cylinder and arc. The work of the shaped workpiece can also perform a certain plastic leveling on the metal sheet, which has the effects of direct pre-bending, saving trouble and material, and is equipped with NC system control to improve the degree of automation. This machine is widely used in high precision requirements.

 

This machine is widely used in high precision requirements, such as: aviation, nuclear power and other metal structural parts manufacturing operations, chemical machinery, offshore oil platforms, oil and gas pipelines and other industries.

The upper roll universal plate rolling machine adopts the upper roll lifting hydraulic transmission and horizontal movement (mechanical transmission). It is driven by the lower roll and is electrically controlled by the operating system. It can complete the pre-bending of both ends of the plate and the rolling cylinder and arc. The work of the shaped workpiece can also perform a certain plastic leveling on the metal sheet, which has the effects of direct pre-bending, saving trouble and material, and is equipped with NC system control to improve the degree of automation.

 

Model  (tons) Plate thickness (mm) (mm)  (mm) (mm) kw
    (mm) (mm)              
w11s-15×2000 75 12 15 2000 255 150 245 7.5 4 1.1
w11s-14×2500 75 10 14 2500 270 150 245 7.5 4 1.1
w11s-13×3000 75 9 13 3000 290 150 245 7.5 4 1.1
w11s-17×2500 100 13 17 2500 300 165 270 15 5.5 1.5
w11s-15×3000 100 11 15 3000 325 165 270 15 5.5 1.5
w11s-20×2500 130 16 20 2500 330 180 300 15 5.5 2.2
w11s-18×3000 130 14 18 3000 350 180 300 15 5.5 2.2
w11s-22×2500 160 18 22 2500 360 200 330 18.5 7.5 2.2
w11s-20×3000 160 16 20 3000 375 200 330 18.5 7.5 2.2
w11s-18×3500 160 14 18 3500 390 200 330 18.5 7.5 2.2
w11s-24×2500 190 21 24 2500 380 220 360 22 7.5 4
w11s-22×3000 190 19 22 3000 400 220 360 22 7.5 4
w11s-19×3500 190 16 19 3500 410 220 360 22 7.5 4
w11s-29×2500 230 25 29 2500 410 235 380 30 11 4
w11s-27×3000 230 21 25 3000 425 235 380 30 11 4
w11s-25×3500 230 21 25 3500 440 235 380 30 11 4
w11s-33×2500 270 28 33 2500 430 250 400 30 11 4
 

Precautions
1. Clean the coiler components, especially where they are connected;
2. When the rolling machine is assembled, it must follow the principle of inside-out, first-down and then-up;
3. Priority in the assembly process to use the same tooling for assembly or assembly work in the same orientation;
4. The assembly process must be carried out in strict accordance with the design drawings. Dimensions, specifications and other aspects must be strictly controlled.

 

Steel Material Plate Rolling Machine Fully Automatic 55kw Driving Motor 0

Maintenance regulations


1. Lubricate the oil cups and manual lubrication points according to the requirements in the machine lubrication diagram.
2. The coil is rolled according to the parameters specified by the coil rolling machine. The thickness of the coil is 20mm and the maximum length is 2500mm. The yield limit of the coil is less than 250Mpa.
3. After turning on the power, carry out the forward and reverse directions of the lower roller and the upward and downward movement of the upper roller, and check for abnormal jamming in each movement.
4. Operate strictly in accordance with the coil processing program and operation method. When the upper roller is raised and lowered to the extreme position, pay attention to the safe operation of the equipment.
5. After the main drive is stopped, the upper roller can be raised and lowered, the tilting of the overturning bearing is reset, and the upper roller is lifted.
6. During the operation, if any abnormal phenomenon such as noise or impact is found, it should be stopped immediately for inspection.
7. During the operation, all personnel should coordinate with each other, obey the instructions of the person in charge of the coil. Without a password, it is forbidden to start the machine.
8. When carrying out the rolling operation, you should pay great attention to the hands being pressed by the steel plate and rolled together with the steel plate.
9. When lifting the steel plate or reel by crane, be careful not to collide with the machine. After the coil is finished, make sure the site is cleared as soon as the materials are completed, and do the maintenance work of the equipment, and turn off the power in time.

Contact Details
Shiny Xu

WhatsApp : +8615895355226