products

Steel Plate Rolling Material Cone Rolling Machine Hydraulic 2500mm Working Length

Basic Information
Place of Origin: Jiangsu
Brand Name: W&L
Certification: ISO
Model Number: W11S45X25000
Minimum Order Quantity: 1set
Packaging Details: container
Delivery Time: 30-50days
Payment Terms: T/T, L/C
Detail Information
Working Length: 2500mm Working Material: Q235, Q345
Pressure: 540Ton Max Plate Thickness: 40mm
Driving Motor: 55kw Roller Material: 42CrMo
High Light:

cone rolling machine

,

hydraulic plate rolling machine


Product Description

 

The main body of the equipment is composed of a main transmission part, a horizontal moving part, an upper roller part, a supporting roller part, a tipping part, left and right frames, a base and a balance device.

1. Main drive system

Located on the right side of the machine, it consists of the main motor, pulley, reducer, output gear, etc.

The system can be forward and reverse to provide working power. The main reducer, output gear, and lower roller gear transmit torque to the lower roller, which causes the lower roller to rotate. The frictional force drives the sheet feed to complete the winding work.

2. Lower roller and horizontal moving parts

The lower roller device is composed of a lower roller, a lower roller bearing seat, a lower roller shaft sleeve, and a lower roller gear.

The lower roller is made of high-quality carbon steel, the whole is tempered, and the surface of the roller body is HRC48 ~ 55.

The horizontal movement device is powered by a horizontal movement motor, and drives the frame and the upper roller components to move horizontally through the worm transmission mechanism and the screw transmission mechanism to realize the pre-bending of the workpiece.

3. Upper roller parts

It is composed of oil cylinder, bearing block, bearing and upper roller.

The upper roller is drum-shaped to compensate for part of the deflection caused by deformation.

The upper roll is made of 42CrMo, it is quenched and tempered, and the surface of the roll body is HRC56 ~ 62.

4. Roller parts

It consists of roller combination, oblique wedge mechanism and spiral mechanism.

The adjusting screw drives the two sets of oblique wedges installed on the opposite side to move closer or apart, thereby raising or lowering the supporting roller combination.

The idler is made of 45 steel and is quenched and tempered.

5. Overturning device

It consists of a pin, a ram, an overturning hydraulic cylinder, and a support.

The overturning hydraulic cylinder works to drive the overturning frame to overturn and reset. When the overturning frame is overturned, the workpiece can be removed axially from the overturned end.

6. Rack

It consists of a frame, a slide and a bushing.

The frame body is welded, annealed and shot peened. Used to install the main hydraulic cylinder, and drive the upper roller parts to move horizontally.

7. Base

Box welding structure, annealing and shot peening. Used to install various components.

8. Balance device

It consists of beams, support plates and tie rods.

It is used to hold the upper end of the upper roller, so that the upper roller is balanced after the frame is overturned, which is convenient for removing the workpiece.

 

Due to different fields of use, the type of rolling machine is also different. From the number of rolls, it is divided into three rolls and four rolls. Three-roller is divided into symmetrical three-roller rolling machine, horizontal downward-adjusting three-roller rolling machine, arc downward-adjusting roller-rolling machine, upper-roller universal three-roller rolling machine, and hydraulic numerically-controlled rolling machine. It is divided into mechanical and hydraulic from the transmission. From the development of the rolling machine, the upper roller universal type is the most backward, the horizontal downward adjustment is slightly advanced, and the arc downward adjustment is the highest.
Three roll plate rolling machine has 1, mechanical and 2, hydraulic

 

The main body of the equipment is composed of a main transmission part, a horizontal moving part, an upper roller part, a supporting roller part, a tipping part, left and right frames, a base and a balance device.

 

Steel Plate Rolling Material Cone Rolling Machine Hydraulic 2500mm Working Length 0

Contact Details
Shiny Xu

WhatsApp : +8615895355226