Payment & Shipping Terms:
|Valid Cutting Width:||3200mm||Valid Cutting Length:||12500mm|
|Rail Length:||15m||Driving:||Double Side|
CNC Flame Cutting Machine 4m Span Two Heads Double Servo Drivers Thick Plate
Economical and high effecient CNC flame/plasma cutting machine can be applied in lot size straight steel plate cutting, as well as various geometric shape cutting.
The main frame is annealed to remove the stress, stable and endurable. The servo motor, reducer, pressure release valve, air pipe and magnetic valve as well as cutting gun used are all world famous brand to ensure excellent performance.
The CNC cutting machine uses imported AC motor, and driven with imported bevel gear reducer. With precision gear and rack move, to ensure stable function. Air cutting speed is adjusted by frequency transformer. The air source control box on the main engine can adjust air pressure from every tunnel easily. All the pressure adjusting valve and main air pipe are original
|CNC plasma torch||Optional||Optional||Optional|
|Rapid return speed||3000mm/min||3000mm/min||3000mm/min|
|Flame cutting thickness||6-100/200mm||6-100/200mm||6-100/200mm|
|CNC flame torch||2 groups||2 groups||2 groups|
|Flame strip torch||9 groups||9 groups||9 groups|
Every CNC machine from the lowest cost and smallest to the largest shipyard machine must have some form of the following components.
CNC control. The brains of the entire machine, converts cutting program into electrical signals that direct the direction and speed that the machine cuts at. Also signals the plasma cutter, height control and other peripherals how and when to operate.
Mechanical components. Each machine has to have moving components such as a gantry (long axis), a torch carriage and a Z-axis (up and down) that manipulate and move the plasma torch to produce the cut parts desired.
Fume Control System. Plasma cutting generates a lot of fumes and smoke. Every machine requires either a downdraft fume control or a water table control.
1. The CNC flame cutting machine is guide rail fixed, gantry gate move type;
2. The flame cutting guns will cut the flange and web of H beam;
3. Cross arm operation accuracy is within 0.5mm/m;
4. Oxy and acetylene or oxy and acetonum gas as fuel source;
5. Guide rail length is 14M*2PCS;
6. X axis Panasonic servo and pilot reducer driven, Y axis Panasonic servo and pilot reducer driven;
7. CNC system: Beijing SH-2000.
Frame unit: Beam, pipe, broadwise beam and longitude and broadwise reducer and etc.
Track unit: Guide and accessories. The guide size is 14m*2PCS.
Cutting torch unit: Linear single cutting gun*10PCS and accessories.
Electric control system: Electric control cabinet, longitude and broadwise motors and accessories.
Gas source unit: Main air rubber pipe, suspending sliding vehicle and etc.
Spare parts: 1 set
30 days from contract.
Contact Person: Shiny Xu