Rotary Capacity: | 20 Ton | Loading Capaicty: | 20+ Ton |
---|---|---|---|
Workpiece Dia. Range: | 850-5000mm | Speed Range: | 100-1000mm/min |
Power: | 1.5kW | Control Cable: | 15m |
High Light: | pipe rollers heavy duty,pipe turning rolls |
Pipe Welding Rotator Rollers Turning Rolls Self Aligned Automatic Adjusted
The Welding Rotator is mainly used for the seam welding of the metallic cylinder / tank. It is a necessary machine to manufacture the pressure vessel, tank and pipe.
PU wheel has better quality compared with the standard rubber wheel. It has longer usage life and can bear higher temperature very well.
Model |
Max loading (Kg) |
Wheel dia. & width(mm) |
Motor power(kw) |
Applied job dia (mm) |
Speed |
|
Rubber or PU |
Metal |
|||||
GZ-10 |
10000 |
Φ300*120 |
2*Φ290*25 |
1.1 |
Φ320-2800 |
Variable |
GZ-20 |
20000 |
Φ350*120 |
2*Φ340*30 |
1.5 |
Φ500-3500 |
Variable |
GZ-40 |
40000 |
Φ400*120 |
2*Φ390*40 |
3 |
Φ600-4200 |
Variable |
GZ-60 |
60000 |
Φ450*120 |
2*Φ440*50 |
4 |
Φ750-4800 |
Variable |
GZ-80 |
80000 |
Φ500*120 |
2*Φ490*60 |
4 |
Φ850-5000 |
Variable |
GZ-90 |
90000 |
Φ500*120 |
2*Φ490*60 |
5.5 |
Φ900-5200 |
Variable |
GZ-100 |
100000 |
Φ500*120 |
2*Φ490*80 |
5.5 |
Φ1000-5500 |
Variable |
GZ-150 |
150000 |
- |
Φ600*280 |
7.5 |
Φ1100-6000 |
Variable |
Parameters:
- Turning Capacity: 20T
- Roller Diameter : Φ300mm
- Roller width: 180 mm
- Roller surface speed range: 100-1000mm / min
- Loaded Vessel/Tank diameter range: Φ500-3500mm
- Drive unit: AC frequency conversion motor and qualified gearbox.
- Wheel center adjustment (for both drive unit and Idler unit): Self Align Type.
- Remote control: Remote control pendent with 15mtrs long Cable
- Rotational speeds (variable speed AC drive): Step-less variable speeds are to be adjusted from min 100mm/min to max 1000mm/min by a potentiometer on the remote control through inverter.
- Rollers: Polyurethene (PU) lined steel rollers with thickness at 25mm.
- Motor power: 1.5kW
The rotator set will usually consist of one drive unit and a few idler units.
The idler unit basically consists of a base frame with four rollers without any power driving, it works with the power unit along with same speed. The drive unit has four rollers driven by motor & reduction gearbox. An inverter is installed to give variable speed for welding purpose. Speed is adjustable on remote box, which connected by a 15m long cable.
Our company has been established since 2005,and steady development by introduction and training of talents. standardization of the management and construction of enterprise culture.Now our company possesses the asset of ten million more and covers anarea of 8,000 square meters.Our main products include Automatic Welding Equipment,Surfacing Welding Equipment,CNC Cutting and Beveling Equipment,Arc welding Robots,Piet/Wind Tower Product line and so on.