|Punching Pressure:||115 Ton||Max Cutting Thickness:||25mm|
|Shear Angle:||7deg||Punch Depth:||25mm|
The machine is mainly a dual hydraulic cylinder workstation consisting of five stations.
1. Punching function: The punching end is equipped with a movable table, which provides a range of punching applications. Change the structure and shape of the stamping die, can punch various shapes of parts, such as: stamping various shaped grooves and holes, sheet hemming, punching shutters, punching the flanges of channel steel, I-beam hole.
2. Angle steel cutting function: angle steel cutting blade, can be used on both sides and around. In order to reduce deformation, large angle steel is cut, large rounded corners are used for movable blades, small angle steel is cut, and small rounded corners are used for movable blades. If the blade is not sharp, it can be turned or changed. Another design adopts a hand-in-one integrated device, which can be used automatically or manually.
3. Sectional steel cutting function: In the hole for section steel cutting, different tools can be used to cut round steel, square steel, channel steel, I-beam and T-beam. The blade is fixed by a simple clamp, which is convenient and reliable for disassembly.
4. Shearing function: In addition to cutting plates and strips, the angle of angle steel or plate can also be trimmed (first cut the size of the required workpiece, and then put the shaped workpiece into this station, you can cut Desired angle).
5. Die-shear power station: Die-shear station can design various trough-shaped punches according to the shape requirements. Such as installing rectangular, V-shaped cutters. When the slotted punch requires sharpening, only the side and front of the punch can be ground. The punch holder is equipped with a movable blade, which can be turned or turned to provide a new cutting edge.
One trip size
|Max punch dia.||25mm||30mm||35mm||38mm|
Using hydraulic transmission, it is the latest product of the domestic combined multifunctional hydraulic combined punching and shearing machine. It can cut, punch, punch and die cut sheet, square steel, round steel, angle steel, channel steel and I-beam.
1 Operate strictly in accordance with operating procedures.
2 Add lubricating oil regularly, fixedly and quantitatively according to the requirements of the lubrication chart before each start-up. The oil should be clean and free of sediment.
3 The shears must always be kept clean and the unpainted parts are protected from rust and grease.
4 The lubricating oil in the motor bearing should be replaced and refilled regularly, and the electrical parts should be checked regularly to see if they are working normally and safely.
5 Frequently check whether the triangle belt, handle, knob and button of the shearing machine are damaged. If it is severely worn, it should be replaced in time and reported for replacement.
6 Regularly inspect and repair switches, fuses, and handles to ensure that they work reliably.
7 Lubricate and scrub the machine tool 10 minutes before work every day.