Payment & Shipping Terms:
|Tilting Capacity:||1 Ton||Rotate Speed:||0.2-2rpm|
|Tilting Range:||0-90degree||Table Elevation:||400mm Stroke|
|Control Cable:||10M||Tilting Speed:||0.35rpm|
Welding Rotary Positioner Manual Elevation 1000kg Loading Tiltable 900mm Table
Generally, the height of a positioner is increased or lowered by using basement or foundation. But, when this manual elevation positioner is used, it can be avoided an instead, it can be lowered or raised by crane. High strength bolts are applied to lock the table position after the worker get the desired height. They are availabe with capacity up to 5Tons.
The table top can rotate infinitely in both directions with a variable speed control for optimal welding.Position your part low or high and/or tilt your part 0° – 180° all while being able to rotate 360°.Each positioner comes equipped with a push button remote box along with a foot pedal for hands free rotational control.
|Table elevate stroke||1500mm MAX||1720mm MAX||1805mm MAX||2150mm MAX|
|1000mm MIN||1120mm MIN||1205mm MIN||1450mm MIN|
|Max gravity at rated capacity||300mm||300mm||300mm||300mm|
|Max eccentric at rated capacity||150mm||200mm||200mm||200mm|
|Rotate motor power||0.55kw||0.75kw||1.1kw||1.5kw|
|Tilt motor power||0.55kw||0.75kw||1.1kw||1.5kw|
Well wrapped and loaded into container, export to Finland.
Welding automation can be broken down into two basic categories: semiautomatic and fully automatic.
In semiautomatic welding, an operator manually loads the parts into the welding fixture. A weld controller then keeps the welding process, motion of the torch, and stillness of the parts to preset parameters. After the weld is completed, the operator removes the completed assembly and the process begins again.
In fully automatic welding, a custom machine, or series of machines, loads the workpiece, indexes the part or torch into position, accomplishes the weld, monitors the quality of the joint and unloads the finished product. Additional "part in place" and final product quality checks may also be designed into the machine if necessary. Depending on the operation, a machine operator may be necessary.
There is nothing to worry about if you tilt a heavy part 90° or more for welding. The tilt-torque rating is even stronger when returning the positioner to home position (0°) eliminating the possibility of failure because a part is too heavy.
We have years of experience in designing and produce all kinds of welding positioners. The function, compatibility, maneuverability, and stability are well concerned when design.
Contact Person: Shiny Xu