Payment & Shipping Terms:
|Load:||3000+kg For Horizontal||Place Of Origin:||WUXI, CN|
|Certificate:||CE||Application:||Tube & Flange Welding|
Pipe Welding Positioner 3000kg Rotation Capacity 1100w driving power
Welding-positioner: is a special accessory tool or manipulator.
It may help achieving the required economic results of a welding program.
It may improve productivity by placing the joint in proper position for the fastest welding.
Coordinated with robot welding it can speed up welding operations.
Welding-positioner is a necessary tool for highly productive mechanically assisted manual welding processes.
Especially for those that supply filler metal continuously from a spool (GMAW, FCAW, SAW) or for GTAW with thin sections, if filler metal is not required.
A set of uniformly placed good quality tack welds has to be made to bridge the gap and to provide some rigidity.
This is required, to oppose the stresses, developed during welding, that tend to displace the edges of the joint.
A Welding-positioner assures enhanced quality and increased productivity.
This is the most important gain, because of reduction of downtime.
In flat position, the welding parameters can be selected to provide the maximum weld deposition rate, compatible with acceptable (not excessive) heat input.
Arc-on time is equally increased resulting in potential reduction of welding costs.
|Max gravity at rated capacity||300mm||300mm||300mm||250mm|
|Max eccentric at rated capacity||150mm||200mm||200mm||150mm|
|Rotate motor power||0.55kw||0.75kw||1.1kw||0.4kw|
|Tilt motor power||0.55kw||0.75kw||1.1kw||0.37kw|
Semiautomatic and fully automatic systems increase output by eliminating the human factor from the welding process. Production weld speeds are set at a percentage of maximum by the machine, not by an operator. With minimal setup time and higher weld speeds, a mechanized welding system can easily outpace a skilled manual welder.
Automating the torch or part motions, and part placement, reduces the possibility of human error. A weld takes place only when all requirements are satisfied. With manual welding, reject welds often increase when welders become fatigued. Depending on the value of the parts when they arrive at the welding station, the cost savings in scrap alone may justify the purchase of an automated welding system. Automation should also be considered when assemblers need to minimize the risk of shipping a bad part to a customer.
Contact Person: Shiny Xu