Payment & Shipping Terms:
|Valid Cutting Width:||3800mm||Valid Cutting Length:||12.5m|
|Rail Length:||15m||Driving:||Double Side|
|Machine Width:||4500mm||Return Speed:||6m/min|
2016 New arrival CNC cutting machine Starfire system Fastcom software
CNC China plasma cutting machine consist of Power source with controls, Water Re-circulating system if required and a well designed Torch. The basic principle is that the arc formed between the electrodes and the work piece is constricted by a fine bore, copper nozzle. This increases the temperature and velocity of the plasma emitting from the nozzle. The temperature of the plasma is in excess of 20,000°C and the velocity can approach the speed of sound. When used for cutting, the plasma gas flow is increased so that the deeply penetrating plasma jet cuts through the material and molten material is removed in the efflux plasma.
|CNC plasma torch||Optional||Optional||Optional|
|Rapid return speed||3000mm/min||3000mm/min||3000mm/min|
|Flame cutting thickness||6-100/200mm||6-100/200mm||6-100/200mm|
|CNC flame torch||2 groups||2 groups||2 groups|
|Flame strip torch||9 groups||9 groups||9 groups|
The Hypertherm Plasma Cutting System Cuts Fast with Amazing Quality
Hypertherm cutting torches offer a wide cutting capacity. They have an impressive consumable life. our series uses Hypertherm’s MAXPRO200, which is specifically engineered for heavy-duty mechanized cutting.
The standard automatic torch height control gets automatically adjusted based on the cutting parameters set. That eliminates the time and planning you may need to make otherwise. It also has an optional plate rider that allows you to cut sheet metal.
Every CNC machine from the lowest cost and smallest to the largest shipyard machine must have some form of the following components.
CNC control. The brains of the entire machine, converts cutting program into electrical signals that direct the direction and speed that the machine cuts at. Also signals the plasma cutter, height control and other peripherals how and when to operate.
Mechanical components. Each machine has to have moving components such as a gantry (long axis), a torch carriage and a Z-axis (up and down) that manipulate and move the plasma torch to produce the cut parts desired.
Fume Control System. Plasma cutting generates a lot of fumes and smoke. Every machine requires either a downdraft fume control or a water table control.
1. Beam with light structural design, the structure has good rigidity, light weight, exercise inertia and
2. Gantry-type structure, Y-axis synchronous dual-motor drive and XYZ axis with circular rail
(optional formula-type linear guide), steady transmission, and high accuracy.
3. For advertising solid light, groove metal panel and bottom plate of the word for cutting,
cutting accuracy good indicator. If equipped with the U.S. Treasure plasma power can achieve lower
laser cutting machine.
4. And other advertising devices(vacuum forming machines, gear cutting machine) to form ad word
processing pipeline, completely solve the traditional way of manual processing. Improve efficiency
5. Plasma cutting machine can cut any conductive metal in high efficiency.
6. CNC system configuration high, automatic arc, stable performance, the success rate of 99% arc.
7. Support Wentai, Beihang Haier, ARTCAM, Type3 software such as the standard G code path
generated file can also be read by software conversion software such ad AUTOCAD generated DXF formats.
U disk exchange control system processing files, easy to operate.
8. Plasma machine can cut aluminum, steel and any other conductive metal in high efficiency.
Contractors of all sizes can use plasma cutters to fabricate metal in the field. This includes mechanical contractors; general contractors; heating, ventilation, air-conditioning, and refrigeration (HVAC/R) contractors; and those responsible for maintenance, repair, and operating (MRO).
Contact Person: Shiny Xu