|Type:||Welding Positioner||Capacity:||800kg For Tilting|
|Load:||800+kg For Horizontal||Place Of Origin:||WUXI, CN|
|Certificate:||CE||Turn Moce:||Slew Bearing|
Good quality Pipe flange Rotating Welding Table With Slew Bearing Oil Free Gearbox
Selecting the right positioning device for the job involves accounting not only for the weight and size of the weldment, but also for the center of gravity (COG) and how far it is from the positioning device. COG is the point at which the weldment balances on all axes equally. As the distance increases from the device, more torque is applied to the positioner. The COG changes as the welder adds material and parts to the positioner, so these changes must be taken into account.
The table rotates by a variable-speed electric motor and can be hand- or foot-controlled. The positioner motor and control should be selected based on the size and speed that are required to perform the desired welding operation.
The positioner specifications will guide the motor and control choice. It’s important for welders to check the specifications for both horizontal and vertical loading to make sure capacity is adequate to handle the weldment. Our positioner is certainly able to withstand the largest possible load.
|Max gravity at rated capacity||200mm||250mm||300mm||300mm|
|Max eccentric at rated capacity||150mm||150mm||150mm||150mm|
|Tilting speed(rpm)||by hands/1.3||0.35||0.35||0.35|
|Rotate motor power||0.37kw||0.4kw||0.4kw||0.55kw|
|Tilt motor power||0.37kw||0.37kw||0.37kw||0.55kw|
All our positioners have slots that allow the workpiece to be bolted to the face. Welding the part to the positioner is often a good way to prevent shear forces from sliding the part as it is maneuvered. Any of these methods, whether stand-alone or combined, will work if applied properly.
Even with small positioning equipment it is important that the unit be mounted to a flat, even surface to prevent it from tipping. If mounting holes are provided, they should be used to secure the positioner to a stable surface to prevent tipping when or if it encounters an unexpected force. The positioner mounted to a workbench or stand must be secured as well.
We offer all kinds of welding positioner, as follows:
1. Welding Bench Positioner
2. Welding Tilt Positioner
3. Welding Turn Positioner
4. Custom Special Welding Positioner