Valid Extend: | 5000mm | Valid Elevate: | 5000mm |
---|---|---|---|
Rotate: | +/- 180dgr | Criss-cross Slide: | 100x100mm |
Extend Speed: | 120-1200mm/min | Elevate Speed: | 1000mm/min |
High Light: | Column And Boom Welding Manipulators,column and boom welding machine |
Column Boom Manipulator 5m stroke Manual Rotation for Pipes, Tanks, Vessels Welding
Our Column & Booms are developed to improve productivity and meet the standards of high quality production. Completed with required standard welding modules and accessories, our C&B complement even the most demanding hard automation solutions.
oUR welding booms are designed in close co-operation with the best professionals. The extensive experience in designing and manufacturing welding automation solutions has been a key factor in the development process. Designed to the same high quality standards as roller beds and positioners, the column and booms fulfil the requirements of the European EN-safety norm.
Model | HC1515 | HC2020 | HC3030 | HC4040 | HC5050 | HC6060 | ||
Transverse stroke (mm) | 1500 | 2000 | 3000 | 4000 | 5000 | 6000 | ||
Elevate stroke (mm) | 1500 | 2000 | 3000 | 4000 | 5000 | 6000 | ||
Column rotate range | +/-180° By manual | +/-180° | +/-180° | +/-180° | +/-180° | |||
Boom elevate speed | 400mm/min | 1000mm/min | ||||||
Boom transverse speed | 120-1200mm/min | |||||||
Criss-Cross slide stroke | 100*100mm by manual | 100X100mm motorized | ||||||
Overall height | Movable | 2310mm | 3140mm | 4940mm | 5940mm | 6960mm | 8230mm | |
Fixed | 2270mm | 3120mm | 4830mm | 5830mm | 6870mm | 8130mm |
The Column boom can work with rotator to achieve automatic welding on vessels. the control can be combined in one remote box.
Automatic Flux feeding & recovery system is equipped on the column and boom. The worker is free of adding flux and observe the consumption all the time.
Completeing the intertnal longitudinal seam of pipes and other vessels is a well known column and boom application using the SAW process. One of the common problems associated with this application is keeping the electrode in the joint. The forming process doesn't always gaurantee a straight weld, often there is a continous curve making it necessary to adjust the position of the electrode throughout the welding operation. Direct viewing of the electrode is obviously not possible because of the flux.
The machine work in Indonesia for pressure vessel industry.
Our Column and booms have a modular construction. Depending on the employed welding process. used material and the geometry of manufactured products. every column and boom can be modularly tailored to best suit the task at hand. In addistion to the dimensios, e.g. the welding equipment, criss-cross slide, welding head mounting, flux feeding & recoverying for SAW, wire reel size and position, seam tracking system, etc. are selected to optimise the device for maximum productivity. Characteristics in both rotation and travel on rails, also their massive grames ensure safety at all times.
The column boom has following advantages:
- Faster welding speed
- Faster set up time
- Less downtime for maintenance