Tank Dia: | 4m Above | Min Stiffner Distance: | 150mm |
---|---|---|---|
Welding Method: | S.A.W. DC-1000 | Flux Capacity: | 50L |
Groove: | K,V | Plate Thickness: | 8-45mm |
Erection Method: | Bottom To Top | ||
High Light: | tank turning rolls,pipe welding rotator |
Tank Girth Welder submerged arc welding machine For Oil Tank Erection
Introduction:
1. Main Frame
Main frame of the girth welder is constructed of structural steel and square tube members.
Erection Method: Bottom to Top
Min Diameter: Φ4.5m
Shell Width: 1.6-3.0m
2. Power Source and Wire Feeder
The standard welding equipment supplied is the Lincoln NA-3S control and K-209A weld head fitted with
nozzle and wire rolls. Wire reel(27.2kg)will be supplied with equipment too.
- Power source S DC-1000HD
Model: DC1000HD
Rate Output: 800A at 44VDC, 100% Duty Cycle
- NA-3S Control
- K209A Wire Feeder
Wire Diameter: Φ2.4-4.8mm
Feed Speed: 0.5-10m/min
3. Console
The MSHW console houses the electrical travel inverter drive and associated control replays it provides a
mean of integrated control of all the accessories of the girth welder (e.g. flux vacuum, 220V single phase aux
outlet, lamp, flux winch and so on).
The console includes all necessary control knobs and switches such as the speed control potentiometer,
direction switch, flux speed travel switch as well as emergency stop button.
4.Flux Recovery System
- Flux hopper capacity:50kg
- Rotating flux dam
5.Cable Assemblies
-Welding Cable 120mmx60m
-Control Cable 10p×2.5mm×60m
- Power Cable 3p×4mm×60m
- Ground Cable 120mm×5m
6. Electric Cabinet
The power source is stored in a weather proof container for protection.
7. Welding power:
Goove type | ![]() |
Machine Components:
Model: | MSHW-L | ||
|
Wire feeder RCH-1 | 1set | Lincoln |
Wire spool | |||
Welding torch & adjuster | |||
Wire straightener | |||
|
CRH-1 controller & digital displayer | 1set | Lincoln |
Travel control box | 1set | ||
|
DC1000HD | 2sets | Lincoln |
|
Travel motor & wheels | 1set | |
Column travel frame | |||
Sliding head mounted beam | |||
Horizontal driving beam | |||
Beam rotation & positioning device | |||
Horizontal assistant wheels | |||
|
1set | ||
|
Welding cable (120mm2 x 50m) | 1sets | |
Control cable (9px2.5mm2 x 50m) | |||
Power cable (3p x 4mm2 x50m) | |||
Earthing cable (120mm2 x10m) | |||
|
Power distributor box & power source storage | 1set | |
|
1set |