Payment & Shipping Terms:
|Valid Cutting Width:||3000mm||Valid Cutting Length:||12000mm|
|Rail Length:||15m||Driving:||Double Side|
|Cutting Thickness:||100mm||Cutting Speed:||1000mm/min|
CNC Oxygen Cutting Machine Double Side Panasonic Driver 100m thickness
|Plasma cutting is suitable for various materials particularly mild steels and stainless steels producing an excellent edge finish. Enhancements to the control systems now mean that optimum cutting performance for a range of materials and thicknesses from 1mm to 50mm in mild steel (dependent upon the power of the plasma unit) can be achieved.|
Parameters associated with cutting a wide range of materials and thicknesses such as cutting speed, gas types and gas pressures can now be controlled automatically by equipment, ensuring a consistently high cut quality. Users now have a truly cost effective alternative to other cutting processes. The features:
1. Double drivers with servo motors from Panasonic
2. Linear guide rails assure the reliable and stable movement
3. Body is heat treated which enhance the rigidity
4. Automatic height sensor makes cutting freely even on fluctuant materials.
5. Special cables holder makes the machine look tidy and protects cables
|CNC plasma torch||Optional||Optional||Optional|
|Rapid return speed||3000mm/min||3000mm/min||3000mm/min|
|Flame cutting thickness||6-100/200mm||6-100/200mm||6-100/200mm|
|CNC flame torch||2 groups||2 groups||2 groups|
|Flame strip torch||9 groups||9 groups||9 groups|
Every CNC machine from the lowest cost and smallest to the largest shipyard machine must have some form of the following components.
CNC control. The brains of the entire machine, converts cutting program into electrical signals that direct the direction and speed that the machine cuts at. Also signals the plasma cutter, height control and other peripherals how and when to operate.
Mechanical components. Each machine has to have moving components such as a gantry (long axis), a torch carriage and a Z-axis (up and down) that manipulate and move the plasma torch to produce the cut parts desired.
Fume Control System. Plasma cutting generates a lot of fumes and smoke. Every machine requires either a downdraft fume control or a water table control.
Finally, the CNC plasma cutting machine comes with excellent reputation for customer service.
Contact Person: Shiny Xu