|Cartridge Size:||110×90×10mm||Switch Time (light To Dark):||0.1ms|
|Switch Time (dark To Light):||≤0.2-0.7S (auto-regulate)||Viewing Window:||98×43mm|
|Ultraviolet Protection:||<0.0003% (313nm)，<0.006% (365nm)||Infrared Protection:||<0.1% (780-2000nm)|
|Shade Range:||4/9—13||Power:||Solar Battery / Changeable Lithium Battery|
0.1ms Full Face Welding Respirator,
battery Full Face Welding Respirator,
Automatic Darkening Full Face Respirator
TM-H2 Full Face View
Electric Air Supply
Automatic Darkening Turnover Type
Air Welding Helmet With Respirator
1.Application and Features
This product is a kind of electric air supply auto-darkening and flipped respiratory protection welding equipment. Filtration accuracy is 0.3μm. Filtration efficiency is 99.97%. It combines respiratory protection, facial skin and eyes protection. Dimming level of auto-darkening glass is 9-13(with inside knob). The response time is less than 0.1ms. The ultraviolet and infrared ray from welding can be filtered by this product and won’t hurt workers’ eyes. In working environment with heavy dust, this product could be the best equipment to protect workers’ eyes and prevent welding pneumoconiosis.
This product also has following features:
-Electric air supply, adjustable air volume.
-HEPA plus activated carbon filter element is used to purify the air, so as to greatly reduce the harm of smoke generated by electric welding to electric welding operators. The filter element is easy to change.
-Power display of forced draft fan and low voltage alarm.
-The blower adopts lithium battery pack, which can be recharged repeatedly.
-The design is light and easy to operate.
-The ergonomic design is comfortable to wear.
-The welding cap is made of high reinforced material with good flame retardance, impact resistance and aging resistance.
-High definition goggle lens can clearly see the welding state of the object to be welded during welding.
-It adopts advanced circuit design and instantaneous arc protection. The mask can darken in an instant.
-Ultraviolet and infrared lasting protection.
-The sensitivity and delay time can be adjusted.
-Grinding and welding modes are optional.
-High performance solar cell + lithium battery.
-Ultra low power consumption, replaceable battery, self check function and low power display.
This product is suitable for many welding working places and TIG,MIG,MAG and arc welding.
But not suitable for Oxygen - acetylene welding or laser welding.
4.Installation Steps are as follows:
(1)Connect belt and engine firmly;
(2)Wear the engine on waist; adjust tightness and position;
(3)Turn on the engine; adjust the airflow and make it at level 3;
(4)Install the helmet an hose(insert the tube head; turn it by clockwise);
(5)Connect the other side of air supply hose to the outlet of the engine(insert the tube head; turn it
by clockwise) ;
(6)Wear the welding helmet on head;adjust tightness and position of the headband;
(7)Close the auto-darkening glass and start to weld.
|Switch Time: (light to dark)||0.1ms|
|Switch Time (dark to light)||≤0.2-0.7S (auto-regulate)|
|Ultraviolet Protection||<0.0003% (313nm),<0.006% (365nm)|
|Infrared Protection||<0.1% (780-2000nm)|
|Power||Solar battery / changeable Lithium battery|