|Rotary Capacity:||10 Ton||Load Capacity:||10+ Ton|
|Workpiece Dia. Range:||320-2800mm||Wheel Material:||Steel Rings+rubber Core|
|Remote Cable:||15m||Wireless Remote:||Avalable|
Hydraulic Conventional Rotator for Welding Pipe Tank Vessel Boiler Fabrication Industry
The present invention is directed to an apparatus for use in a paint booth to facilitate the coating of an object such as a wheel or rim with a liquid, powder, or other coating. The rotator is designed to rotate a wheel about both its horizontal and vertical axes. In this manner, the wheel may be more easily and uniformly coated with a minimum of effort by a paint booth operator. After the wheel is coated, the apparatus is designed to lift the object above the work surface so that it can be connected to an overhead conveyor system that may be provided to remove the wheel from the paint booth.
Conventional wheeled rotators rely on four points of contact underneath the component. But if an offset or eccentric weight is being rotated, then the component will slip on these rollers as the weight begins to rise, making it impossible to complete a rotation safely at a controlled speed. we designed a rotator with three wheels, two below and a third clamping onto the top of the weldment. This enables an eccentric weight to be rotated 360°, safely and under accurate speed control. This development enabled the welding of complex components to be automated, because the system can compensate for offset loads and the drive torques can be continuously adjusted to achieve constant travel speeds.
Applied job dia
|Wheel dia. & width(mm)||Wheel linear speed(mm/min)||Motor power(kw)|
|Rubber or PU||Metal|
By stepless inverter
Cycloid-pin gear transmission
1. Pressure vessels
2. Pipe manufacturing industries
3. Wind power fabrication
4. Chemical & fuel storage tank fabrication
5. Any heavy cylindrical job