Payment & Shipping Terms:
|Plate Length:||15m||Milling Angle:||+/-45dgr|
|Plate Thickness:||6-50mm||Plate Material:||Carbon Steel|
|Milling Speed:||0.3,0.5m/min||Return Speed:||5m/min|
|Milling Power:||7.5kW||Table Height:||900mm|
Plate bevelling Edge Milling Machine / steel edge beveling machine
It's not unusual for circuit boards that have been fabricated to require additional milling to reduce that thickness on certain areas of the circuit board. This milling is nominally completed by the circuit board fabricator prior to board assembly.
Usually, this milling is done to allow the installation of face-plates, bezels, or the insertion of the circuit board into a card slot without restriction. Occasionally, the milling operation is either missed, or not milled to the desired thickness. We have often been asked to perform the milling operation on assembled circuit boards.
|Beveling sheet thickness||6-50mm||6-50mm||6-50mm||6-50mm|
|Max bevel depth at first cut||12-15mm||12-15mm||12-15mm||12-15mm|
|Transverse bevel speed||0.3/0.5m/min||0.3/0.5m/min||0.3/0.5m/min||0.3/0.5m/min|
|Bevel spindle rev.||125-900rpm||125-900rpm||125-900rpm||125-900rpm|
|Nos of milling head||1(+1)||1(+1)||1(+1)||1(+1)|
|Milling head power||7.5kw||7.5kw||7.5kw||7.5kw|
|Platform height||900mm||900 mm||900mm||900mm|
- Milling head, Taiwan brand, give unique milling quality.
Angle is adjustable from 0-45dgr, or -45dgr to 0, can be applied to different processing requests.
- Machine body is shot blasted and done by heat treatment, to provide a long lasting working without deforamtion.
- All the pressing jacks are hydraulic controlled, give powerful & reliable pressure on the steel plate during milling process.
Contact Person: Shiny Xu